New Tutorial...............Giving

This tutorial was written on 6th April 2009
Any simularity to another tutorial is purely coincidental

SUPPLIES NEEDED

I am using PTU scrapkit by Connies Creative Chaos kit is called Giving (tagger size) which can be Purchased HERE
2/3 Close up Tubes of choice i am using Jennifer Janesko under lisence number CI0035LM which can be purchased from CILM
WordArt 5 from Weescotlass which can be downloaded HERE Thanks for sharing
Font of choice


Let's Get Started


Open your supplies and minimise
Open a new Layer 700 x 700 floodfill with white

Open up Frame 4 copy and paste as a new layer resize by 80%
Open Tube 1 of choice copy and paste as a new layer resize by 80% place below the frame layer grab your magic wand select inside one of the frame boxes selection modify by 10 select invert onto tube layer hit delete select none Add a dropshadow 1,1,30,3,Black


Onto Tube 2 copy and paste as a new layer resize by 80% place below the frame layer grab your magic wand select inside the second frame box selection modify by 10 select invert onto tube layer hit delete select none Add a dropshadow 1,1,30,3,Black

Open a paper of choice copy and paste as a new layer resize by 80% place below the frame layer grab your magic wand select inside the third frame box selection modify by 10 select invert onto tube layer hit delete select none Add a dropshadow 1,1,30,3,Black

Add a dropshadow to the frame layer 1,1,30,3,Black Merge down these layers remember leave your white background layer duplicate the merged layer and resize by 80% adjust Blur,Gaussian Blur setting 20 then add noise setting uniform checked monochrome checked setting 40

Open DoodleGreen 2 of choice copy and paste as a new layer place above the duplicated Gaussian layer resize by 60% place between the frames i postioned on the lower frame then duplicated postioned this layer near the middle one and erased any parts showing Add a dropshadow 1,1,30,3,Black

Open wordart of choice copy and paste as a new layer resize by 70% place on the right side of the frame layer reduce the opacity to around 80% Add a dropshadow

Open Humming1 of choice copy and paste as a new layer resize by 50% place on the right side of the frame duplicate and on the duplicate layer adjust blur gaussian blur add noise setting 40 uniform merge down both layers duplicate and mirror position to the bottom left of the frame add a dropshadow

Open a TiedHeartRibbon copy and paste as a new layer resize by 40% place on the left corner of the middle frame add a dropshadow

Open Blue1 copy and paste as a new layer resize by 60% twice and place on the top frame corner duplicate and place on the bottom corner frame add a dropshadow

Open Blue3 copy and paste as a new layer resize by 30% place over the Blue1 duplicate and place over the second Blue1 add a dropshadow

Open Flower 4 copy and paste as a new layer resize by 70% then again by 30% place on the bottom corner of the middle frame add a dropshadow

Open Tiedblue2 copy and paste as a new layer resize by 50% then again by 40% place over flower 4 add a dropshadow

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file and you are finished
I hope you enjoyed this tutorial,

New Tutorial.........Eggstravaganza

This tutorial was written on 6th April 2009

Any simularity to another tutorial is purely coincidental

I am using FTU scrapkit by Monica of simplysensationalscraps kit is called Eggstravaganza (tagger size) which can be downloaded HERE

Tubes of choice i am using Elias Chatzoudis under lisence number MPT9906 which can be purchased from MPT

Mask 119 by Weescotlass which can be downloaded HERE Thank you for sharing

Font of choice

Let's Get Started

Open your supplies and minimise

Open a new Layer 700 x 700 floodfill with white

Open a paper of choice copy and paste as a new layer place above the white background layer, then layers from mask then image then in the dropdown section find your mask source luminance checked invert mask data unchecked and apply delete the mask layer and merge mask layer reduce the opacity to around 80 or as desired

Open up Frame 4 copy and paste as a new layer, Image free rotate by 90% right Next Open a paper of choice copy and paste as a new layer onto the frame layer selection inside the frame holding down shift key to select both the selection modify by 4, selection invert back to paper layer hit delete select none Open a Tube of choice copy and paste as a new layer place below the frame layer position as desired grab your erase tool and erase any parts overhanging over the frame Add a dropshadow to the frame layer and the tube layer 1,1,30,3,Black

Merge down the tube layer,paper layer and Frame layer

Open tag of choice copy and paste as a new layer resize by 60% place over the frame layer on the right side add a dropshadow 1,1,30,3,Black

Open grass of choice copy and paste as a new layer resize by 50% then place on the right side near bottom of the frame layersee me tag for reference Add a dropshadow 1,1,30,3,Black

Open Blossom of choice copy and paste as a new layer resize by 60% place above the grass layer on the left side duplicate and mirror place on the right side of the grass like my tag add a dropshadow

Open Fence of choice copy and paste as a new layer resize by 50% place above the Blossom layer add a dropshadow

Merge down the Grass,Fence and Blossom layer Duplicate and postion on the left side of the frame layer like my tag

Open a Basket of choice copy and paste as a new layer resize by 80% then again by 50% place beside the fence layer on the right side and add a dropshadow 1,1,30,3,Black
Open Rabbit of choice copy and paste as a new layer resize by 50% place beside the basket layer add a dropshadow

Open eggs of choice copy and paste as a new layer resize by 50% place on the left side of the fence layer position as desired add a dropshadow

Open Flowepot of choice copy and paste as a new layer resize by 80% then again by 60% place on the left side of the frame add a dropshadow

Open butterfly of choice copy and paste as a new layer resize by 60% place on Left side of the frame layer duplicate and mirror add a dropshadow

Add your copyright information and your name

crop your tag resize by 80%

save your file as a png file and you are finished
I hope you enjoyed this tutorial,

New Tutorial.........Top Notch

This tutorial was written on 5th April 2009Any simularity to another tutorial is purely coincidental

I am using FTU scrapkit by Monica of simplysensationalscraps kit is called silver shaddow (tagger size) which can be downloaded HERE
Tubes of choice i am using Keith Garvey under lisence number MPT9906 which can be purchased from MPT
Font of choice

Let's Get Started

Open your supplies and minimise

Open a new Layer 700 x 700 floodfill with white

Open up Frame 6 copy and paste as a new layer Open a Tube of choice copy and paste as a new layer place below the frame layer position as desired grab your erase tool and erase any parts overhanging over the frame then adjust hue saturation colourize hue 0 saturation 0 your tube should now be grey.

Open a paper of choice copy and paste as a new layer place above the white background layer so your layer pallette should be from bottom upwards white background,paper layer, Tube and frame layer,back to the paper layer grad your eraser tool and erase any parts outside the frame layer Add a dropshadow to the frame layer and the tube layer 1,1,30,3,Black

Merge down the tube layer,paper layer and Frame layer duplicate and on the original adjust blur, gaussian blur with settings at 20.00 then add noise 30 gaussian, monochrome checked
open Binder of choice copy and paste as a new layer resize by 50% then image free rotate 90% right place over the frame layer on the right side add a dropshadow 1,1,30,3,Black

Open Blossom of choice copy and paste as a new layer resize by 70% then duplicate image mirror place both together and merge down place on the bottom left of the frame layer Add a dropshadow 1,1,30,3,Black
Open Fan of choice copy and paste as a new layer resize by 60% place above the Blossom layer on the left side image free roatae by 20% left add a dropshadow Open Doodle of choice copy and paste as a new layer place above the duplicated gaussian layer on the right side of the frame duplicate and flip position on the left side of the frame add a dropshadow

Open butterfly of choice copy and paste as a new layer resize by 30% place on one of the frame layers duplicate and mirror add a dropshadow

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file and you are finished
I hope you enjoyed this tutorial,

New Tutorial..............Silver Shadow

This tutorial was written on 5th April 2009Any simularity to another tutorial is purely coincidental

I am using FTU scrapkit by Monica of simplysensationalscraps kit is called silver shaddow (tagger size) which can be downloaded HERE
Tubes of choice i am using Keith Garvey under lisence number MPT9906 which can be purchased from MPT
Font of choice


Let's Get Started

Open your supplies and minimise
Open a new Layer 700 x 700 floodfill with white
Open up Frame 1 copy and paste as a new layer Open a paper of choice copy and paste as a new layer place above the white background layer grab your eraser tool and erase any parts outside the frame layer add a dropshadow 1,1,30,3,Black

Open a Tube of choice copy and paste as a new layer resize by 90% place below the frame layer duplicate and place this layer above the frame layer desired grab your erase tool and erase any parts overhanging over the frame on both tube layers then adjust hue saturation colourize hue 0 saturation 0 on both tube layers your tube should now be grey.
Add a dropshadow to the frame layer and the tube layer 1,1,30,3,Black

Merge down the tube layers, paper layer and Frame layer duplicate and on the original effects texture effects mosiac,antique settings 50,50 symmetric ticked 70,2,50 and apply

Open Doodle of choice copy and paste as a new layer place above the duplicated mosiac layer on the right side of the frame duplicate and flip position on the left side of the frame add a dropshadow

Open butterfly of choice copy and paste as a new layer resize by 70% then again by 60% place on the roses on the frame layers add a dropshadow

Open a lily of choice copy and paste as a new layer image free rotate by 20% right place on the right side of the frame on the bottom corner add a dropshadow

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file and you are finished
I hope you enjoyed this tutorial,

New Tutorial.................Pink Passion

This tutorial was written on 1st April 2009Any simularity to another tutorial is purely coincidental


I am using PTU scrapkit by Babycakes kit is called pink passion (tagger size)
which can be purchased HERE
Tubes of choice i am using a close up image of Jennifer Janesko under lisence number CI0035LM which can be purchased from CILM
Font of choice



Let's Get Started

Open your supplies and minimise

Open a new Layer 700 x 700 floodfill with white

Open up Triple Frame copy and paste as a new layer resize by 70% Open a Tube of choice copy and paste as a new layer resize by 80% place below the frame layer in the middle frame position as desired grab your erase tool and erase any parts overhanging over the frame. Open another tube copy and paste as a new layer ressize by 80% position to the top left frame again below frame layer and erase any parts overhanging duplicate mirror place bottom right and erase any bits showing
Add a dropshadow to the frame layer and the tube layers 1,1,30,3,Black


open Doodle 2 copy and paste as a new layer resize by 80% then again by 70% place above the white background layer and below the tubes position as desired or like my tag just showing above the right side of frame erase any parts showing at the bottom you don't want the duplicate and mirror then flip place on the bottom left of the frame erase any parts showing over the top right of frame
add a dropshadow 1,1,30,3,Black


Open Bc wings copy and paste as a new layer resize by 80% then again by 40% place at the top right of the tag duplicate and resize by 50% duplicate again and position both around your tag Add a dropshadow 1,1,30,3,Black


Open word art copy and paste as a new layer resize by 60% place below the frame layer on the left side add a dropshadow Open Rose Jewel copy and paste as a new layer resize by 50% image free rotate by 20 degrees left place by the word art add a dropshadow


Open Brad 2 copy and paste as a new layer resize by 25% place on one of the frame corners duplicate and place on a different one add a dropshadow


Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file and you are finished

I hope you enjoyed this tutorial,

New Tutorial...............Rhapsody

This tutorial was written on 30th March 2009
Any simularity is purely coincidental


SUPPLIES NEEDED


I am using PTU scrapkit by Heart & Soul Creations kit is called Rhapsody (tagger size) which can be purchased HERE
Tube of choice i am using Keith Garvey under License number MPT9906 which can be purchased from MPT
Font of choice
Mask of choice


Let's Get Started


Open your supplies and minimise

Open a new Layer 700 x 700 floodfill with white

Open a paper of choice copy and paste as a new layer above the white background layers new mask layer, from image find your mask in the dropdown section source luminance checked invert mask data unchecked and apply delete the mask layer and merge group


Open up Frame 2 copy and paste as a new layer grab your magic wand select in each of the frame pieces select modify by 4 Open a paper of choice copy and paste as a new layer select invert on the frame layer back to the paper layer hit delete select none add a dropshadow to the frame 1,1,30,3,Black


open a Tube of choice copy and paste as a new layer resize by 90% then place by the bottom frame window so the bottom part is inside the frame duplicate and position inside the left frame window erase any parts showing outside the frame or see my tag for reference add a dropshadow to both tubes 1,1,30,3,Black


Open HeartRibbon 1, copy and paste as a new layer resize by 90% image mirror place on the left side of the frame by your tube add a dropshadow Open Beads 1 copy and paste as a new layer resize by 50% then by 60% place on the right side of the frame
add a dropshadow

Open Glass heart 1 copy and paste as a new layer resize by 40% then by 50% image fee rotate by 20 degrees left place in the middle of the 2 frames like my tag or as desired
add a dropshadow


Add your copyright information and your name
save your file as a png file and you are finished

I hope you enjoyed this tutorial,

New Tutorial..............Pink Sherbert

This tutorial was written on 29th March 2009

any simularity is purely coincidental

SUPPLIES NEEDED

I am using Pink Sherbert (Taggers size) from Heart and Soul creationz

which can be purchased HERE

Tube of Choice I am using Jennifer Janesko under license CI0035LM

which you can purchase from CILM

Mask of choiceFont of choice

Lets get Started

This is a quick and easy Tutorial lolOpen a new raster layer 700 x 700 Floodfill with whiteOpen a paper of choice copy and paste as a new layer layers new mask from image find your mask from the drop down section source luminance checked invert data unchecked and apply delete mask layer merge group

Open Frame 4 copy and paste as a new layer grab your magic wand and use your shift key select inside the frame ensuring you get each piece as there is some small pieces by the flower lol select modify by 6 select invert paste a paper of choice below frame layer hit delete select none add a dropshadow 1,1,30,3,Black

Open a tube of choice copy and paste as a new layer below the frame layer add a dropshadow 1,1,30,3,Black duplicate and position one above the frame erase parts showing over the frame on both tube layers or until happy

Open a decoration of choice copy and paste as a new layer resize by 60% place on the frame on the ribbon at the bottom duplicate and position next to other add a dropshadow

Open a loopybow of choice copy and paste as a new layer resize by 60% image mirror then place on the left side of the frame like my tag Open a sunflower copy and paste as a new layer resize by 60% place over the loopybow like my tag add a dropshadow to both

Add any copyright and your name crop your tag and save as png

that's it easy lol

Thanks for trying my tutorial