Sunday 28 June 2009

New Tutorial.........Stargazer

This tutorial was written on 28th June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Angela of Schnegge scraps kit is called Stargazer (tagger size) which can be Purchased HERE
Tubes of choice i am using a close up from Jennifer Janesko under license number CI0035LM you can purchase there tubes from CILM
Font of choice

Let's Get Started

Open your supplies and minimise
Open a new raster layer 700 x 700 and floodfill with white
Open frame 1 copy and paste as a new layer grab your magic wand select inside each of the squares holding down your shift key select modify by 5 then select invert copy and paste your tube as a new layer resize by 110% or as desired so it fits in the frame then hit delete select none Add a dropshadow 1,1,30,3,Black

Next Open Bow 4 copy and paste as a new layer,resize by 70%, position over the middle of the frame Add a dropshadow 1,1,30,3,Black

Open Diamond copy and paste as a new layer resize by 40% position on the Left hand side of the frame Add a dropshadow 1,1,30,3,Black

Open String 1 copy and paste as a new layer resize by 50% then position on the frame Add a dropshadow 1,1,30,3,Black

Open Tag 2 copy and paste as a new layer resize by 70% then again by 60% position on the right hand side of the frame Add a dropshadow 1,1,30,3,Black

Open Butterfly 3 copy and paste as a new layer resize by 70% then again by 50% position on the top left hand side of the frame then duplicate image mirror position on the right hand of the frame Add a dropshadow 1,1,30,3,Black

Open Bug copy and paste as a new layer resize by 40% then image free rotate by 20 degrees right position bottom left hand side of the frame Add a dropshadow 1,1,30,3,Black

Open Glitter 2 copy and paste as a new layer position below the frame top right hand side duplicate mirror and flip position on bottom left hand side below the frame
Open Glitter 1 resize by 40% then do the same as above Add a dropshadow 1,1,30,3,Black

Open Star 9 copy and paste as a new layer resize by 40% place on the bottom right hand side of the frame duplicate then mirror and flip position top left hand side of the frame Add a dropshadow 1,1,30,3,Black

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file
and you are finished
I hope you enjoyed this tutorial,

Tuesday 23 June 2009

New Tutorial........Gothic Kitten **Animated**









This tutorial was written on 23rd June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Gothic Inspirations kit is called Dark of the night (tagger size) which can be Purchased HERE
Tubes of choice i am using Deacon Black under license number CI0035LM you can purchase there tubes from CILM
Font is Gothikka and is a free font HERE

Let's Get Started

Open your supplies and minimise
Open a new raster layer 700 x 700 and floodfill with white
Open Frame Old copy and paste as a new layer Add a dropshadow 1,1,30,3,Black
Next Open Matt 3 copy and paste as a new layer,resize by 110% position below the frame layer Add a dropshadow 1,1,30,3,Black

Open Pentagon copy and paste as a new layer position inside the frame Add a dropshadow 1,1,30,3,Black

Open Swirl design copy and paste as a new layer resize by 50% then position below the frame on the top right hand side duplicate then image flip image mirror position bottom left hand side of frame Add a dropshadow 1,1,30,3,Black

Open Star copy and paste as a new layer resize by 50% then again by 20% position on the top right hand side of the swirl design duplicate and position again then merge down both duplicate and position bottom left hand side of the bottom swirl design Add a dropshadow 1,1,30,3,Black

Open Glitter spray copy and paste as a new layer position on the top left hand side below the frame duplicate then image mirror image flip position bottom right hand side of frame Add a dropshadow 1,1,30,3,Black

Open Moonhalfcluster copy and paste as a new layer resize by 40% then place on the top left hand side of the frame Add a dropshadow 1,1,30,3,Black

Open Tube of choice copy and paste as a new layer resize by 90% then place below the frame Add a dropshadow 1,1,30,3,Black

Open staple copy and paste as a new layer resize by 50% position at the top of the frame Add a dropshadow 1,1,30,3,Black

Add your copyright information and your name crop your tag resize by 80%
***ANIMATION if desired***

Onto pentagon layer duplicate image free rotate 20 degrees rightduplicate again image free rotate 20 degrees right do the same until you have a total of 4 layers
close off the top 3 layers leave the first layer open
EDIT>COPY MERGED
into Animation shop
PASTE AS A NEW ANIMATION
back to psp
close off first layer open second layer
EDIT>COPY MERGED
into Animation shop
PASTE AFTER CURRENT FRAME

back to psp
close off second layer open third layer
EDIT>COPY MERGED
into Animation shop
PASTE AFTER CURRENT FRAME
back to psp
close off third layer open fourth layer
EDIT>COPY MERGED
into Animation shop
PASTE AFTER CURRENT FRAME

THEN EDIT SELECT ALL ,ANIMATION FRAME PROPERTIES AND CHANGE TO 15
SAVE FILE AS GIF
Thanks for doing this tutorial

Sunday 21 June 2009

New Tutorials...........I do believe

This tutorial was written on 21st June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Kristi of Scrappin Divas kit is called I do Believe (tagger size) which can be Purchased HERE
Tubes of choice
Font of choice

Let's Get Started

Open your supplies and minimise
Open a new raster layer 700 x 700 and floodfill with white
Open Frame 2 copy and paste as a new layer resize by 80% then again by 60% Next grab your magic wand onto the frame layer select inside the frame then modify expand by 5 new raster layer and floodfill with a nice gradient or a paper of choice select none Add a dropshadow 1,1,30,3,Black

Open Cloud copy and paste as a new layer resize by 20% duplicate twice position near the top inside the frame as desired Add a dropshadow 1,1,30,3,Black

Open Castle copy and paste as a new layer resize by 50% then position below the frame on the bottom edge Add a dropshadow 1,1,30,3,Black

Open Fairy 2 copy and paste as a new layer resize by 40% then position on the left hand side in the frame Add a dropshadow 1,1,30,3,Black

Open Fairy 1 copy and paste as a new layer resize by 30% then position on the right hand side in the frame Add a dropshadow 1,1,30,3,Black

Open Vine 2 copy and paste as a new layer resize by 50% then place on the right hand side of the frame duplicate and image flip position to top of frameAdd a dropshadow 1,1,30,3,Black

Open Mushrooms copy and paste as a new layer resize by 50% then again by 50% position right hand side above the vine Add a dropshadow 1,1,30,3,Black

Open Frog copy and paste as a new layer resize by 30% position on the mushroom Add a dropshadow 1,1,30,3,Black

Open Glittervine copy and paste as a new layer resize by 20% position on left hand side of frame duplicate and position above joining together Add a dropshadow 1,1,30,3,Black

Open Flower 1 copy and paste as a new layer resize by 40% position over the glittervine on the top left hand side of the frame Add a dropshadow 1,1,30,3,Black

Open Dragon copy and paste as a new layer resize by 40% image mirror position bottom left hand side above the glittervine Add a dropshadow 1,1,30,3,Black

Add any other Elements as desired

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file
you are finished
I hope you enjoyed this tutorial,

New Tutorial.........Vintage Souvenirs




This tutorial was written on 21st June 2009
Any simularity to another tutorial is purely coincidentalI am using PTU scrapkit by Lyn of Scrappin Divas kit is called Among my Souvenirs (tagger size) which can be Purchased
HERE Tubes of choice i am using Jennifer Janesko under license number CI0035LM you can purchase there tubes from CILM
Mask of choice
Font of choice

Let's Get Started

Open your supplies and minimise
Open a new raster layer 700 x 700 and floodfill with white
Open a paper of choice copy and paste as a new layer place above the white background layer, then layers new mask from image find your mask in the dropdown section source luminance checked invert data unchecked and apply delete mask layer and merge group

Open Antique Frame copy and paste as a new layer resize by 70% Add a dropshadow 1,1,30,3,Black

Next Open a tube copy and paste as a new layer,resize by 90% position below the frame layer grab your magic wand onto the frame layer select inside the frame then modify expand by 5 select invert onto your tube layer hit delete select none Add a dropshadow 1,1,30,3,Black

Open Beadspill copy and paste as a new layer resize by 40% image flip position on the top right hand side below the frame duplicate then image mirror image flip position below the frame on the bottom left hand side Add a dropshadow 1,1,30,3,Black

Open Babysbreath copy and paste as a new layer resize by 50% then again by 80% position below the frame on the top left hand side Add a dropshadow 1,1,30,3,Black

Open Locket copy and paste as a new layer resize by 40% then position on the left hand side of the frame Add a dropshadow 1,1,30,3,Black

Open Rossette copy and paste as a new layer resize by 50% then again by 20% position on the left hand side above the locket Add a dropshadow 1,1,30,3,Black

Open Heartclock copy and paste as a new layer resize by 40% then place on the right hand side of the frame Add a dropshadow 1,1,30,3,Black

Open Stitchedbutterfly copy and paste as a new layer resize by 20% then image free rotate 10 degrees right place on the right hand side above the heartclock duplicate the butterfly image mirror resize by 40% place on left hand side of frame Add a dropshadow 2,2,50,5,Black

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file
you are finished
I hope you enjoyed this tutorial,

Saturday 20 June 2009

New Tutorial.......Happy 4th July

This tutorial was written on 20th June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Ladyanne Inzpired Designz kit is called July 4th Picnic (tagger size) which can be Purchased HERE
Tubes of choice i am using Michael Landefeld under license number CI0035LM you can purchase there tubes from CILM
Mask of choice
Font of choice

Let's Get Started

Open your supplies and minimise

Open a new raster layer 700 x 700 and floodfill with white
Open a paper of choice copy and paste as a new layer place above the white background layer, then layers new mask from image find your mask in the dropdown section source luminance checked invert data unchecked and apply delete mask layer and merge group lower opacity to around 80

Open Element 20 copy and paste as a new layer image mirror grab your selection tool set to rectangle draw around the inside of the frame just abit bigger than the middle layer new raster layer floodfill with black select none position this below the frame
Add a dropshadow 1,1,30,3,Black

Next Open a tube copy and paste as a new layer,resize by 90% position above the black layer lower the opacity to around 50
Add a dropshadow 1,1,30,3,Black

Open Tube copy and paste as a new layer resize by 90% image mirror position on the left hand side of the frame
Add a dropshadow 1,1,30,3,Black

Open Element 37 copy and paste as a new layer resize by 40% then position above the tube on hand side duplicate and position next to element 37 Open element 36 copy and paste as a new layer resize by 40% position behind element 37
Add a dropshadow 1,1,30,3,Black

Open Element 23 copy and paste as a new layer resize by 60% then position on the right hand side of the frame
Add a dropshadow 1,1,30,3,Black

Open Element 38 copy and paste as a new layer resize by 50% then position on the top left of the canvas
Add a dropshadow 1,1,30,3,Black

Open Element 18 copy and paste as a new layer resize by 70% then place on the right hand side above element 23
Add a dropshadow 1,1,30,3,Black

Open Element 33 copy and paste as a new layer resize by 60% then place on the left hand at the top of the frame
Add a dropshadow 2,2,50,5,Black

Open Element 35 copy and paste as a new layer resize by 20% then duplicate place either side of your name
Add a dropshadow 2,2,50,5,Black

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file
you are finished
I hope you enjoyed this tutorial,

Thursday 18 June 2009

New Tutorial............Togetherness




This tutorial was written on 18th June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Captivated Visions kit is called We are Family (tagger size) which can be Purchased
HERE
Tubes of choice i am using Suzanne Woolcott under license number AMIJABE you can purchase there tubes from her website
Mask 84 by Weescottlass
HERE, Thank you for sharing
Font of choice

Let's Get Started

Open your supplies and minimise

Open a new raster layer 700 x 700 and floodfill with white
Open a paper of choice copy and paste as a new layer place above the white background layer, then layers new mask from image find your mask in the dropdown section source luminance checked invert data unchecked and apply delete mask layer and merge group

Open Grasshill copy and paste as a new layer resize by 80% place on the right hand side duplicate and place over the first one making it slightly longer grab your eraser tool and erase the line down the middle of the hill joining them Add a dropshadow 1,1,30,3,Black

Next Open Ourhouse copy and paste as a new layer,resize by 40% position above hill on the top right hand side Add a dropshadow 1,1,30,3,Black

Open Vine copy and paste as a new layer resize by 20% position on the right hand side of our house Add a dropshadow 1,1,30,3,Black

Open Family tree copy and paste as a new layer resize by 40% then position beside the house on left hand side duplicate and position near bottom of grasshill Add a dropshadow 1,1,30,3,Black
Open Tube copy and paste as a new layer resize by 80% then position on the grasshill on the left hand side Add a dropshadow 1,1,30,3,Black

Open Wordart1 copy and paste as a new layer resize by 50% then position on the top left of the canvas Add a dropshadow 1,1,30,3,Black

Open Cloud copy and paste as a new layer resize by 50% then place on the right hand side of the wordart duplicate and position near the house chimney Add a dropshadow 1,1,30,3,Black

Open Butterflygreen copy and paste as a new layer resize by 20% then place under the wordart on the left hand side duplicate image mirror position between the clouds on the right hand side Add a dropshadow 2,2,50,5,Black

Open Familypaperchain copy and paste as a new layer resize by 25% then duplicate twice place infront of the grasshill to make a fence Add a dropshadow 2,2,50,5,Black

Add your copyright information and your name
crop your tag
resize by 80%
save your file as a png file
you are finished
I hope you enjoyed this tutorial
,

New Tutorial......Purple Minted




This tutorial was written on 18th June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Angela of Schnegge scraps kit is called Purple & Mint (tagger size) which can be Purchased
HERE
Tubes of choice i am using Keith Garvey under license number MPT9906 you can purchase there tubes from MPT
Font of choice

Let's Get Started

Open your supplies and minimise

Open a new raster layer 700 x 700 and floodfill with white
Open frame 4 copy and paste as a new layer image free rotate by 20 right grab you magic wand select inside the frame select modify by 3 new raster layer floodfill with black place below the frame hit delete select none merge down the two,then duplicate and mirror
Add a dropshadow 1,1,30,3,Black

Next Open Frame 3 copy and paste as a new layer,position above the other frames then grab you magic wand select inside the frame select modify by 3 select invert then paste a paper as a new layer below the frame hit delete select none,next open Tube copy and paste as a new layer resize by 80% above the frame duplicate and place below the frame above the paper back to the top copy grab your eraser tool and erase bits over the bottom of the frame
Add a dropshadow 1,1,30,3,Black

Duplicate your tube layer position over the right hand floodfill layer grab your magic wand select inside the floodfill layer select invert onto tube layer hit delete select none lower the opacity to around 60 duplicate and mirror or do the same process for the left hand side one
Add a dropshadow 1,1,30,3,Black

Open Glitter 2 copy and paste as a new layer position on the right hand side of the frame 4 below it duplicate and mirror Add a dropshadow 1,1,30,3,Black

Open Flower 12 copy and paste as a new layer resize by 90% then position on top of the frame 3 on the bottom right hand side Add a dropshadow 1,1,30,3,Black

Open Bird copy and paste as a new layer resize by 90% then position next to the flower 12 layer Add a dropshadow 1,1,30,3,Black

Open Butterfly 7 copy and paste as a new layer resize by 20% then image free rotate by 20 left position on the top right hand of the frame Add a dropshadow 1,1,30,3,Black

Open Pendant 1 copy and paste as a new layer resize by 80% then image mirror place on the left side of the frame Add a dropshadow 1,1,30,3,Black

Open Heart 2 copy and paste as a new layer resize by 30% then image free rotate by 20 left position on top of the pendant 1 on the left hand side of frame Add a dropshadow 1,1,30,3,Black

Open Butterfly 6 copy and paste as a new layer resize by 40% place on the bottom left hand side of the frame duplicate then mirror Add a dropshadow 1,1,30,3,,Black

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file
and you are finished
I hope you enjoyed this tutorial,

Tuesday 16 June 2009

New Tutorial.....Illusions





This tutorial was written on 16h June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Magic Scraps by Sabs kit is called Illusion in Pink (tagger size) which can be Purchased
HERE
Tubes of choice i am using close up by Jennifer Janesko under license number CI0035LM you can purchase there tubes from CILM
Mask of choice
Font of choice

Let's Get Started

Open your supplies and minimise

Open a new raster layer 700 x 700 and floodfill with white
Open a paper of choice copy and paste as a new layer place above the white background layer, then layers new mask from image find your mask in the dropdown section source luminance checked invert data unchecked and apply delete mask layer and merge group

Next Open Frame 1 copy and paste as a new layer,duplicate and mirror position as close to each other as you like,merge down both frames, next open Tube of choice copy and paste as a new layer below the frame grab your magic wand holding down the shift key select inside the frames then select modify by 5, select invert back to your Tube layer hit delete select none Add a dropshadow 1,1,30,3,Black

Open Spiralheart copy and paste as a new layer resize by 50% position on the right hand side of the frame duplicate and mirror, Add a dropshadow 1,1,30,3,Black

Open a Box copy and paste as a new layer resize by 50% then again by 50% position on top of the spiralheart on the left hand side Add a dropshadow 1,1,30,3,Black

Open Flower copy and paste as a new layer resize by 20% then position on top of the spiralheart on the right hand side Add a dropshadow 1,1,30,3,Black

Open Candle copy and paste as a new layer resize by 20% position in the middle bottom of the the frame duplicate and psoition togetherAdd a dropshadow 1,1,30,3,Black

Open Butterfly copy and paste as a new layer resize by 20% then place on the top right hand side of the frame duplicate mirror position bottm left of frameAdd a dropshadow 1,1,30,3,Black

Open Keylock copy and paste as a new layer resize by 50% then again by 50% position on top left hand side of frame duplicate and place this below frame back to top one grab your eraser tool and erase bit off the silver lock so its hooked in the frame Add a dropshadow 2,2,50,5,Black
Open Star rain copy and paste as a new layer resize by 80% place over the top of the frame Add a dropshadow 2,2,50,5,Black

Open Blingbutterfly copy and paste as a new layer resize by 20% image free rotate by 30 right place in middle of frames Add a dropshadow 2,2,50,5,Black

Add your copyright information and your name
crop your tag
resize by 80% save your file as a png file
and you are finished
I hope you enjoyed this tutorial
,

Monday 15 June 2009

New Tutorial......Bachelor Party (Animated)



This Tutorial was written on 15th June 2009
Any Simularity to any other Tutorial is purely coincidental

SUPPLIES NEEDED

1 tube of choice I am using Keith Garvey under license number MPT9906 You can purchase there tubes from MPT
Scrap- kit by Kristi of The Scrappin Divaz, kit is called Bachelor Party(Taggers size) and can be purchased
HERE.
Font of Choice
Mask of choice.
Animation shop (optional)

LETS GET STARTED

Open your supplies and minimise

Open new raster layer 700 x 700 pixels Floodfill with white send to bottom,
Open a paper of choice copy and paste as a new layer place above the white background layer, then layers new mask from image find your mask in the dropdown section source luminance checked invert data unchecked and apply delete mask layer and merge group

Open Polaroid copy and paste as a new layer resize by 80% select all select float select defloat select invert copy and paste a paper of choice above the polaroid hit delete select none delete original Add a drop shadow 2, 2, 50, 5, Black

Open paper of choice copy and paste below polaroid grab your magic wand select inside the polaroid select modify by 5 select invert onto paper layer hit delete select none Add a dropshadow 2,2,50,5,Black

Open Sparkles copy and paste as a new Layer resize by 50% position above the mask layer duplicate and mirror Add a drop shadow 2, 2, 50, 5, Black,

Open Music notes copy and paste as a new layer then position above the frame layer Add a drop shadow 2, 2, 50, 5, Black,

Next open String copy and paste as a new layer resize by 60% place on the left hand side of the frame Add a dropshadow 2,2,50,5,Black

Open wordart sexy copy and paste as a new Layer resize by 50% then position below the frame Add a dropshadow 2,2,50,5 Black

Open Pole copy and paste as a new layer resize by 80% position in front of the wordart Add a drop shadow 2, 2, 50 ,5, Black,

Open Tube of choice copy and paste as a new layer resize by 80% position above the Pole Add a drop shadow 2, 2, 50, 5, Black

Open Beer copy and paste as a new layer resize by 70% then again by 70% position on right hand side behind the pole duplicate and mirror Add a dropshadow 2,2,50,5,Black

Open Ball and chain copy and paste as a new layer resize by 70% place on the left hand side Add a dropshadow 2,2,50,5,Black

Open Furrycuffs copy and paste as a new layer resize by 60% then again by 80% image mirror position on the right hand side Add a dropshadow 2,2,50,5,Black

Open Girl copy and paste as a new layer resize by 60% position on the left side of the polaroid just above the wordart duplicate and mirror Add a dropshadow 2,2,50,5,Black

Open light copy and paste as a new layer position on the left side behind the pole camera light duplicate and mirror Add a dropshadow 2,2,50,5,Black

Add your copyright and name and resize by 80%


******Animation******

If you want to animate follow steps below
rename girl layers both girl1 then duplicate both and rename girl2 position both girl2 opposite to girl1 so they are facing the other way lol
close off both girl2 for now
onto lights layer close off right hand side light you should have left hand light and girls1 open edit copy merged paste as new animation in animation shop
back to psp close off girls 1 and left hand light open girls 2 and right hand lightedit copy merged into animation and paste after current layer
close off girls 2 open girls1 and open both lights layer edit copy merged into animation paste after current layer edit select all animation reverse frames,animation frame properties set to 25run your animation and make sure your happy save animation

New Tutorial........Friends




This Tutorial was written on 15th June 2009
Any Simularity to any other Tutorial is purely coincidental

SUPPLIES NEEDED

1/2 tubes of choice .I am using Suzanne Woolcott under license number AMIJABE you can purchase her tubes from her website.
Scrap- kit by Lynn of Scrappin Divaz, kit is called Bouquet of friends(Taggers size) and can be purchased
HERE.
Font of Choice.

LETS GET STARTED

Open your supplies and minimise

Open new raster layer 700 x 700 pixels Floodfill with white send to bottom,
Open Framewshadow copy and paste as a new layer resize by
Open Tube copy and paste as a new layer below the frame resize by 90% grab your magic wand onto the frame layer select inside the frame select defloat select modify by 5 then select invert onto the tube hit delete select none Add a drop shadow 2, 2, 50, 5, Black

Open Rainbow copy and paste as a new layer above the frame layer image mirror resize by 50% Add a drop shadow 2, 2, 50, 5, Black,

Next open Tree copy and paste as a new layer above the frame on the right hand side resize by 50% Add a dropshadow 2,2,50,5,Black

Open Girl copy and paste as a new Layer resize by 50% position next to the tree Add a dropshadow 2,2,50,5,Black

Open Fence copy and paste as a new layer resize by 40% position infront of the tree Add a dropshadow 2,2,50,5,Black

Open Grass copy and paste as a new layer resize by 70% then again by 40% position below the duplicate and place next to grass Add a drop shadow 2, 2, 50 ,5, Black,

Open Kite copy and paste as a new layer resize by 40% position on the right hand side by the girl Add a dropshadow 2,2,50,5,Black

Open Heartclusters copy and paste as a new layer below the Frame layer near the top left duplicate and position this bottom right side see my tag for reference Add a dropshadow 2,2,50,5,Black

Open Stringtags copy and paste as a new layer resize by 40% place above the frame layer on the left hand side Add a dropshadow 2,2,50,5,Black

Open wordart copy and paste as a new layer resize by 20% psoition top left of frame Add a dropshadow 2,2,50,5,Black
Open Pearlbutterfly copy and paste as a new layer resize by 70% then againb by 20% image free rotate by 20 degrees right position on the frame duplicate mirror and psoition on left hand side of frame Add a dropshadow 2,2,50,5,Black

add any copyright and your name,
Layers Merge Flatten,
crop your tag and resize by 90%
Save as Png.

New Tutorial..........Ohjaneskolala


This Tutorial was written on 15th June 2009
Any Simularity to any other Tutorial is purely coincidental

SUPPLIES NEEDED

1 tube of choice I am using Jennifer Janesko under license number CI0035LM You can purchase there tubes from CILM
Scrap- kit by Kristi of The Scrappin Divaz, kit is called OOOHLALA
(Taggers size) and can be purchased HERE.
Font of Choice.

LETS GET STARTED

Open your supplies and minimise
Open new raster layer 700 x 700 pixels Floodfill with white send to bottom,
Open Frame 3 copy and paste as a new layer resize by 90% grab your magic wand select inside then select modify by 5 select invert copy and paste a paper of choice below the frame hit delete select none Add a drop shadow 2, 2, 50, 5, Black

Open Tube of choice copy and paste as a new layer resize by 80% position above the frame duplicate and place below the frame grab your eraser tool and on the top layer erase the parts outside the frame Add a drop shadow 2, 2, 50, 5, Black

Open Bracket frame copy and paste as a new layer place above the white background layer Add a dropshadow 2,2,50,5,Black

Duplicate frame 3 and adjust blur gaussian blur setting 10 apply
Open Bling copy and paste as a new Layer resize by 50% position below the frame above the paper layer Add a drop shadow 2, 2, 50, 5, Black,

Open Bubbles copy and paste as a new layer resize by 50% then position above the bling layer Add a drop shadow 2, 2, 50, 5, Black,

Next open Leaves copy and paste as a new layer resize by 60% place on the right hand side of the frame then duplicate and mirror Add a dropshadow 2,2,50,5,Black

Open Rose copy and paste as a new Layer resize by 40% then position on the right hand side on the leaves duplicate and position just below merge down the 2 roses then duplicate and mirror Add a dropshadow 2,2,50,5 Black

Open Hearts copy and paste as a new layer position on the right hand side of the frame duplicate and mirror Add a drop shadow 2, 2, 50 ,5, Black,

Open Mask copy and paste as a new layer resize by 40% then position on right hand side above the roses layer Add a dropshadow 2,2,50,5,Black

Open Bird copy and paste as a new layer resize by 60% place above the frame on the botttom left hand side Add a dropshadow 2,2,50,5,Black

Open Wordart copy and paste as a new layer position above the tube and frame at the top Add a dropshadow 2,2,50,5,Black

add any copyright and your name,
Layers Merge Flatten,
crop your tag and resize by 90%Save as Png.

Sunday 14 June 2009

New Tutorial........Gorguss Love

This tutorial was written on 14th June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit byLynne aka Babycakes kit is called Baby Love (tagger size) which can be Purchased HERE
Tubes of choice i am using Suzanne Woolcott under license number AMIJABE you can purchase there tubes from her website
Mask 81 by Weescotlass which you can download HERE, Thank you for sharing
Font of choice

Let's Get Started

Open your supplies and minimise
Open a new raster layer 700 x 700 and floodfill with white
Open a paper of choice copy and paste as a new layer place above the white background layer, then layers new mask from image find your mask in the dropdown section source luminance checked invert data unchecked and apply delete mask layer and merge group

Next Open pink cluster Frame 2 copy and paste as a new layer resize by 80% then again by 60% next open your tube and resize by 90% place it below the frame layer grab your magic wand back to your frame layer select inside the frame select modify by 5 select invert onto tube layer hit delete select none Add a dropshadow 1,1,30,3,Black

Open Tree copy and paste as a new layer resize by 65% position bottom of the frame on the left hand side Add a dropshadow 1,1,30,3,Black

Open Girl Giraffe flower copy and paste as a new layer resize by 40% then place infront of the tree on the left hand side Add a dropshadow 1,1,30,3,Black

Open Teddy Bear copy and paste as a new layer resize by 20% position on the swing Add a dropshadow 1,1,30,3,Black

Open Blocks Stickers copy and paste as a new layer resize by 50% place on the top of the frame on the right hand side duplicate and position other bottom right hand side of the frame see my tag Add a dropshadow 1,1,30,3,Black

Open Wordart of choice copy and paste as a new layer resize as desired position on bottom right hand side of the frame Add a dropshadow 1,1,30,3,Black

Open Tube copy and paste as a new layer resize by 80% position on the right hand side of the frame above the block stickers layer Add a dropshadow 1,1,30,3,Black

Open Pink wings copy and paste as a new layer resize by 10% image free rotate by 30 degrees right position on the left hand side of the frame duplicate and mirror Add a dropshadow 1,1,30,3,Black

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file
you are finished
I hope you enjoyed this tutorial,

Wednesday 10 June 2009

New Tutorial........Memories of Love



This tutorial was written on 10th June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Danielle of Dazzling Scraps kit is called Memories of You (tagger size) which can be Purchased
HERE
Tubes of choice i am using Elias Chatzoudis under license number MPT9906 You can purchase there tubes from MPT
Wordart of choice i used Weescottlass you can download
HERE,Thank you for sharing
Mask of choice
Font of choice

Let's Get Started

Open your supplies and minimise
Open a new raster layer 700 x 700 and floodfill with white
Open a paper of choice copy and paste as a new layer place above the white background layer, then layers new mask from image find your mask in the dropdown section source luminance checked invert data unchecked and apply delete mask layer and merge group

Next Open Frame 1 copy and paste as a new layer image free rotate by 30 degrees left,next open a paper of choice copy and paste as a new layer below the frame grab your magic wand select inside the frame then select modify by 5, select invert back to your paper layer hit delete select none Add a dropshadow 1,1,30,3,Black

open your tube and resize by 70% position in your frame Add a dropshadow 1,1,30,3,Black then duplicate and position this layer below the frame back to the top one grab your eraser tool and erase any parts showing at the bottom of the frame on both layers merge down the tubes paper and frame layer then duplicate and mirror

Open Rose 1 copy and paste as a new layer resize by 70% position above the frame in the middle of both frames Add a dropshadow 1,1,30,3,Black

Open a candle copy and paste as a new layer resize by 30% then position on the right hand side above the frame Add a dropshadow 1,1,30,3,Black

Open a candle copy and paste as a new layer resize by 25% then position infront of the first candle on the right hand side Add a dropshadow 1,1,30,3,Black

Open Dragonfly copy and paste as a new layer resize by 30% position in the top middle of the frameAdd a dropshadow 1,1,30,3,Black

Open a star copy and paste as a new layer resize by 70% then place on the left hand side of the frame open another star resize by 60% position inside first starAdd a dropshadow 1,1,30,3,Black

Open Wordart of choice position on the left hand side Open Daisy flower copy and paste as a new layer resize by 20% position on the right hand side of the wordart Add a dropshadow 1,1,30,3,Black

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file
and you are finished
I hope you enjoyed this tutorial,

Tuesday 9 June 2009

New Tutorial..........Just Another Lullaby





This tutorial was written on 9th June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Just a Girl's Designs kit is called Just another Lullaby (tagger size) which can be Purchased
HERE
Tubes of choice
Template 09 by Blissfully Beth
HERE, Thank you for sharing
Mask of choice
Font of choice

Let's Get Started

Open your supplies and minimise
Open a new raster layer 700 x 700 and floodfill with whiteOpen a paper of choice copy and paste as a new layer place above the white background layer, then layers new mask from image find your mask in the dropdown section source luminance checked invert data unchecked and apply delete mask layer and merge group

Next on rounded rectangle layer select all select float select defolat new raster layer floodfill with black select none delete original layer
Add a dropshadow 1,1,30,3,Black

Onto Frame layer select all select float select defolat new raster layer floodfill with black select none delete original layer
Add a dropshadow 1,1,30,3,Black

Open Cloud 2 copy and paste as a new layer position on the rounded rectangle layer
Add a dropshadow 1,1,30,3,Black

Open Sleepy mouse on moon copy and paste as a new layer place on top of the frame Bg
Add a dropshadow 1,1,30,3,Black

Open Hickory Dickory Dock copy and paste as a new layer position on top of the Frame so it looks like a clock see my tag for reference
Add a dropshadow 1,1,30,3,Black

Open Jumping sheep 2 copy and paste as a new layer resize by 60% place above the frame on the top right hand side then duplicate image mirror
Add a dropshadow 1,1,30,3,Black

Open Stork copy and paste as a new layer resize by 50% position above the frame in the middle of the sheep
Add a dropshadow 1,1,30,3,Black

Open Babyflower copy and paste as a new layer resize by 70% position on the right hand side Add a dropshadow 1,1,30,3,Black

Open Owl copy and paste as a new layer resize by 40% position on the right hand side at the bottom of the frame
Add a dropshadow 1,1,30,3,Black

Open Lullaby wordart copy and paste as a new layer position next to the owl see my tag for reference
Add a dropshadow 1,1,3,30,Black

Open Flower 2 copy and paste as a new layer resize by 40% position on the left hand side below the wordart
Add a dropshadow 1,1,3,30,Black

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file
and you are finished
I hope you enjoyed this tutorial,

New Tutorial..........Meoww Girls




This Tutorial was written on 9th June 2009
Any Simularity to any other Tutorial is purely coincidental

SUPPLIES NEEDED

1/2 tubes of choice I am using Ismael Rac under license number MPT9906 You can purchase there tubes from MPT
Scrap- kit by Kristi of The Scrappin Divaz, kit is called Pussycatgirls(Taggers size) and can be purchased
HERE.
Font of Choice.

LETS GET STARTED

Open your supplies and minimise

Open new raster layer 700 x 700 pixels Floodfill with white send to bottom,

Open Frame 2 copy and paste as a new layer resize by 90% grab your magic wand select inside both parts of the frame holding down the shift key then select modify by 5 select invert copy and paste a paper of choice below the frame hit delete select none
Add a drop shadow 2, 2, 50, 5, Black

Open Tube of choice copy and paste as a new layer resize by 80% position below the frame grab your eraser tool and erase any parts outside the frame duplicate then mirror lower the opacity to both by 50
Add a drop shadow 2, 2, 50, 5, Black

Open Discoball copy and paste as a new Layer resize by 50% position in the middle of the frame Add a drop shadow 2, 2, 50, 5, Black,
Open Backstage pass copy and paste as a new layer resize by 40% then position on the left hand side of the frame
Add a drop shadow 2, 2, 50, 5, Black,

Next open chain copy and paste as a new layer resize by 50% place on the right hand side of the frame
Add a dropshadow 2,2,50,5,Black

Open Ticket copy and paste as a new Layer resize by 70% then again by 50% position on the right hand side over the chain image free rotate by 20 degrees right
Add a dropshadow 2,2,50,5 Black

Open Glitterweb copy and paste as a new layer position above the white background
Add a drop shadow 2, 2, 50 ,5, Black,

Open Startrail copy and paste as a new layer resize by 50% then position on right hand side of frame duplicate the mirror should be on left hand side too
Add a dropshadow 2,2,50,5,Black

Open Wordart 2 copy and paste as a new layer resize by 70% place above the frame on the botttom middle part
Add a dropshadow 2,2,50,5,Black

Open Drums copy and paste as a new layer resize by 60% then place on the left hand side
Add a dropshadow 2,2,50,5,Black

Open Cat copy and paste as a new layer resize by 50% place on the left hand side on the drum see my tag for reference
Add a dropshadow 2,2,50,5,Black

Open Paws copy and paste as a new layer place behind the drums duplicate and place abit above the first
Add a dropshadow 2,2,50,5,Black
Open Milk copy and paste as a new layer resize by 30% position in front of the drums on the left hand side
Add a dropshadow 2,2,50,5,Black

Open Tube copy and paste as a new layer resize by 80% then position on the right hand side Add a dropshadow 2,2,50,5,Black

add any copyright and your name,
Layers Merge Flatten
,crop your tag and resize by 90%
Save as Png.

Sunday 7 June 2009

New Tutorial......Tranquility




This tutorial was written on 7th June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Heart and soul creations kit is called Tranquility (tagger size) which can be Purchased
HERE
Tubes of choice i am using Jennifer Janesko under license number CI0035LM you can purchase there tubes from CILM
Mask 81 by Weescotlass which you can download
HERE, Thank you for sharing
WordArt by Weescotlass which can be downloaded
HERE, Thanks for sharing
Font of choice

Let's Get Started

Open your supplies and minimise

Open a new raster layer 700 x 700 and floodfill with whiteOpen a paper of choice copy and paste as a new layer place above the white background layer, then layers new mask from image find your mask in the dropdown section source luminance checked invert data unchecked and apply delete mask layer and merge group

Next Open Frame 10 copy and paste as a new layer resize by 90% next open your tube and resize by 70% place it below the frame layer Add a dropshadow 1,1,30,3,Black

Open Element 69 copy and paste as a new layer resize by 80% image free rotate by 90 degrees left position bottom of the frame Add a dropshadow 1,1,30,3,Black

Open Element 34 flower copy and paste as a new layer resize by 60% then again by 50% place on top of the frame layers on the left hand side Add a dropshadow 1,1,30,3,Black

Open Element 85 copy and paste as a new layer resize by 50% position on top of the Element 34 flower Add a dropshadow 1,1,30,3,Black

Open Element 32 copy and paste as a new layer resize by 50% place below the top right hand side of the frame duplicate image mirror image flip and position bottom left hand side under the frame see my tag Add a dropshadow 1,1,30,3,Black

Open Wordart of choice copy and paste as a new layer resize as desired position on bottom right hand side of the frame Add a dropshadow 1,1,30,3,Black

Open Element 38 copy and paste as a new layer resize by 30% position on the left hand side of the wordart Add a dropshadow 1,1,30,3,Black

Open Element 1 copy and paste as a new layer resize by 30% position on the right hand side of the wordart,
Open Element 2 resize by 25% place infront of Element 1 Add a dropshadow 1,1,30,3,Black

Add your copyright information and your name
crop your tag
resize by 80% save your file as a png file
and you are finished
I hope you enjoyed this tutorial
,

Friday 5 June 2009

New Tutorial...........Rock Grunge




This tutorial was written on 5th June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Magic Scraps by Sabs kit is called Distressed Rock Grunge (tagger size) which can be Purchased
HERE
Tube of choice i am using Ismael Rac under license number MPT9906 you can purchase there tubes from MPT
Template 73 from Essence of creativity by Yvette
HERE. Thank you For Sharing
Mask of choice
Font of choice

Let's Get Started

Open your supplies and minimise

Open Template 73 shift D and close original delete info layer then Image canvas size 700 x 700 pixels lock aspect ratio unchecked, Layer New Raster Layer floodfill with white send to bottom,Delete Background Layer,

Open a paper of Choice copy and paste as a new Layer,Layer New Mask Layer, from image find your mask in the dropdown section and apply making sure invert mask data is unchecked,onto mask layer hit delete and merge group

Open a paper of Choice copy and paste as a new Layer,onto Rectangles, select all select float,select defloat select invert onto paper layer hit delete select none, Add a dropshadow 2,2,50,5,Black,delete Original Layer,

Open a paper of choice copy and paste as a new layer onto Squares, Selection all, select float, select defloat,select invert onto paper layer hit delete select none, Add a drop shadow 2, 2, 50, 5, Black, delete Original Layer,

Next Open Corset 2 copy and paste as a new layer resize by 70%,then again by 50% position inside the squares layer on the right hand side Add a dropshadow 1,1,30,3,Black

Open Ipod 2 copy and paste as a new layer resize by 70% then again by 40% position on the left hand side of the squares layer Add a dropshadow 1,1,30,3,Black

open your tube and resize by 70% position in the middle of the top of the template Add a dropshadow 1,1,30,3,Black

Open Ribbonpin 1 copy and paste as a new layer resize by 40% then position on top of the ipod on the left hand side Add a dropshadow 1,1,30,3,Black

Open Words of charm 2 copy and paste as a new layer resize by 60% then position on the bottom of the tube Add a dropshadow 1,1,30,3,Black

Open Tennis shoe 1 copy and paste as a new layer resize by 15% position on the left hand next to the charm duplicate and mirrorAdd a dropshadow 1,1,30,3,Black

Open Brad copy and paste as a new layer resize by 10% then place inside of the charm hole duplicate and place in the other side see my tag for reference Add a dropshadow 1,1,30,3,Black

Open Sequin 4 copy and paste as a new layer resize by 30% then again by 10% then place as desired duplicate a few times position around the tag Add a dropshadow 1,1,30,3,Black

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file
and you are finished
I hope you enjoyed this tutorial,

New Tutorial.......Truley Minted


This tutorial was written on 5th June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Magic Scraps by Sabs kit is called Truley Cheeky (tagger size) which can be Purchased HERE
Tube of choice i am using Jennifer Janesko under license number CI0035LM you can purchase there tubes from CILM
Mask of choice
Font of choice

Let's Get Started

Open your supplies and minimise

Open a new raster layer 700 x 700 and floodfill with white

Open a paper of choice copy and paste as a new layer place above the white background layer, then layers new mask from image find your mask in the dropdown section source luminance checked invert data unchecked and apply delete mask layer and merge group

Next Open Frame 3 copy and paste as a new layer resize by 60%,next open a paper of choice copy and paste as a new layer below the frame grab your magic wand select inside the frame then select modify by 5, select invert back to your paper layer hit delete select none
Add a dropshadow 1,1,30,3,Black

open your tube and resize by 70% position in your frame then grab your magic wand select inside the frame then select modify by 5 then select invert back to your tube layer hit delete select none Add a dropshadow 1,1,30,3,Black

Open Flower 3 copy and paste as a new layer resize by 50% position on the left hand side of the frame
Add a dropshadow 1,1,30,3,Black

Open Frog 1 copy and paste as a new layer resize by 20% then position on top of the flower 3 on the left hand side
Add a dropshadow 1,1,30,3,Black

Open Flower 4 copy and paste as a new layer resize by 60% then again by 70% position below the frame layer on the right hand side
Add a dropshadow 1,1,30,3,Black

Open Flower felt 1 copy and paste as a new layer resize by 30% position on the right hand bottom of the the frame
Add a dropshadow 1,1,30,3,Black

Open Butterfly copy and paste as a new layer resize by 20% then place on the top left hand side of the frame
Add a dropshadow 1,1,30,3,Black

Add your copyright information and your name
crop your tag
resize by 80% save your file as a png file
you are finished
I hope you enjoyed this tutorial,

Thursday 4 June 2009

New Tutorial......Forever Friends

This Tutorial was written on 4th June 2009
Any Simularity to any other Tutorial is purely coincidental

SUPPLIES NEEDED

1 tube of choice or ones in scrapkit
Scrap- kit by Kristi of The Scrappin Divaz, kit is called You and Me(Taggers size) and can be purchased HERE.
Mask of choice.
Font of Choice.

LETS GET STARTED

Open your supplies and minimise

Open new raster layer 700 x 700 pixels Floodfill with white send to bottom,

Open a paper of choice copy and paste as a new layer place above the white background layer, then layers new mask from image find your mask in the dropdown section source luminance checked invert data unchecked and apply delete mask layer and merge group

Open Grass2 copy and paste as a new layer resize by 10% then duplicate place above white background place next to each other merge down then duplicate again position either side of the canvas near the bottom
Add a drop shadow 2, 2, 50, 5, Black

Open House 2 copy and paste as a new layer resize by 20% position in the middle of both grass layers see my tag for reference
Add a drop shadow 2, 2, 50, 5, Black

Open Tree copy and paste as a new Layer resize by 20% position on the left hand side above the grass in the middle duplicate then position on right hand side
Add a drop shadow 2, 2, 50, 5, Black,

Open flower copy and paste as a new layer resize by 20% then again by 70% position on the grass duplicate as desired and position as desired see my tag for reference
Add a drop shadow 2, 2, 50, 5, Black,

Next open girl 4 copy and paste as a new layer resize by 10% place on the left hand side
Add a dropshadow 2,2,50,5,Black

Open girl 1 copy and paste as a new Layer resize by 10% position on the right hand side
Add a dropshadow 2,2,50,5 Black

Open Scooter copy and paste as a new layer resize by 10% then position in front of the girl 1 on the right hand side
Add a drop shadow 2, 2, 50 ,5, Black,

Open Triple frame copy and paste as a new layer resize by 70% then again by 30% place above the house grab magic wand select inside all three squares holding down the shift key select modify by 5 then new raster layer floodfill with a colour of choice select none

Open 3 Tubes of choice or 3 girls i used the girls and resized by 10% then place each behind the frame window grab your eraser tool and erase any parts outside the frame
Add a dropshadow 2,2,50,5,Black to the tubes and frame

Open Cloud copy and paste as a new layer resize by 20% place above the frame on the left hand side
Add a dropshadow 2,2,50,5,Black

Open Sun copy and paste as a new layer resize by 10% then place above the frame on the right hand side
Add a dropshadow 2,2,50,5,Black

Open Kite copy and paste as a new layer resize by 10% place on the left hand side above the frame
Add a dropshadow 2,2,50,5,Black

Open Gardener copy and paste as a new layer resize by 20% place in front of the fence
Add a dropshadow 2,2,50,5,Black

Open bee copy and paste as a new layer resize by 40% then again by 10% image free rotate by 20 right duplicate and position as desired
Add a dropshadow 2,2,50,5,Black

Open bubble copy and paste as a new layer resize by 10% duplicate and position as desired
Add a dropshadow 2,2,50,5,Black
add any copyright and your name,
Layers Merge Flatten,
crop your tag and resize by 90%
Save as Png.

Monday 1 June 2009

New Tutorial........Treasured Moments





This tutorial was written on 1st June 2009
Any simularity to another tutorial is purely coincidental
I am using PTU scrapkit by Heart and soul creations kit is called Treasured Love (tagger size) which can be Purchased
HERE
Tubes of choice i am using Elias Chatzoudis under license number MPT9906 you can purchase there tubes from MPT
Mask of choice
Font of choice

Let's Get Started

Open your supplies and minimise

Open a new raster layer 700 x 700 and floodfill with white
Open a paper of choice copy and paste as a new layer place above the white background layer, then layers new mask from image find your mask in the dropdown section source luminance checked invert data unchecked and apply delete mask layer and merge group

Next Open Frame 6 copy and paste as a new layer resize by 80% open a paper of choice copy and paste a paper below the frame back to your frame grab your magic wand select inside the frame select modify by 5 select invert back to your paper layer hit delete select none Add a dropshadow 1,1,30,3,Black Onto your tube copy and paste as a new layer resize by 80% position over the frame duplicate and place below the frame back to the top tube grab your erase tool and erase any parts outside the frame you dont want
Add a dropshadow 1,1,30,3,Black

Open Element 74 copy and paste as a new layer resize by 80% place on the right hand side of the frame duplicate position to the left hand side Add a dropshadow 1,1,30,3,Black
Open Element 11 copy and paste as a new layer resize by 70% place on top of the element 74 at the bottom use your mover tool to adjust the width to fit the same as the frame
Add a dropshadow 1,1,30,3,Black

Open Element 36 copy and paste as a new layer image mirror position below the frame layer on the right hand side duplicate and position on the bottom left side below the frame
Add a dropshadow 1,1,30,3,Black

Open Element 58 copy and paste as a new layer resize by 60% place on the left hand top corner of the frame see my tag
Add a dropshadow 1,1,30,3,Black

Open Element 85 copy and paste as a new layer resize by 50% place on the right hand side below the frame see my tag
Add a dropshadow 1,1,30,3,Black

Add your copyright information and your name
crop your tag resize by 80%
save your file as a png file
and you are finished
I hope you enjoyed this tutorial,